Gupta's "Big bird with folding wing" on a test flight. By mimicking the folding of the bird’s wing, the team was able to slow the flight velocity by 10 percent without any appreciable decrease in the payload capability of the MAV.


| View videos of these MAVs flying at S.K. Gupta's web site| Bird-like micro air vehicles (MAVs) are expected to play a big role in future surveillance and reconnaissance missions. These remote-controlled MAVs are expected to be stealthy and highly maneuverable for operations in constrained spaces. The U.S. military hopes someday these MAVs will be able to carry surveillance cameras and other payloads that will aid their operations. One can easily imagine how useful such an aircraft could be in gathering data from enemy territory. Students of University of Maryland Professor S.K. Gupta (ME/ISR) have developed several working versions of an “ornithopter,” a bird-like MAV that both flaps and folds its wings. Ornithopters offer greater possibilities both for miniaturization and maneuverability in the field than their fixed-wing or rotary-wing MAV cousins. Until Gupta’s research made it possible, ornithopters were generating lift primarily by flapping their wings. Gupta’s work on lightweight drive-mechanisms has enabled his team to start testing designs with folding wings. When flying, larger birds like hawks or seagulls fold their wing on the upstroke. This slows their forward velocity and enables them to carry large payloads. (Smaller birds like hummingbirds use a different motion, rotating their wings in flight.) Since it would be highly desirable for a surveillance MAV to fly slowly and carry a significant sensor payload, developing working a folding-wing technology that actually flies is a large step forward in making these aircraft possible. The drive-mechanism is a critical part of the MAV design because it transfers the power from the motor to the flapping wings. Gupta’s team has developed multi-piece molding technology that enables development of geometrically complex structures. Using this technology his team has developed a new lightweight drive mechanism. This drive-mechanism minimizes moving parts by exploiting biologically inspired compliant structures. Elimination of moving parts eliminates power loss during the transmission. Folding wings are heavier than non-folding wings. So advances in lightweight, highly efficient drive-mechanisms have been crucial in achieving folding wing flight. Gupta’s team first developed four flapping-wing MAVs that did not have folding wings, and demonstrated their capacity to fly. Each of these ornithopters was successively larger, so that increasingly heavy payloads could be carried. The length of flight is determined by the capacity of the batteries onboard the aircraft. The largest of these ornithopters, which weighs 1.5 ounces, can carry a video camera with a transmitter as well as its batteries, and stay aloft for 14 minutes in calm air. The video camera’s images can be stabilized via software. The folding-wing version of these MAVs began flying in September 2008. With the folding wing, the aircraft could slow its flight velocity by 10 percent without any appreciable decrease in its payload capacity. The folding-wing MAV weighs 1.3 ounces with its batteries, and has a wing span of 22.5 inches. It is capable of carrying a payload (usually a surveillance camera) that weighs .35 ounces. Importantly, Gupta’s MAVs do not use propeller system to “help” the wings. Such motors are too loud for reconnaissance purposes, forfeiting the element of stealth. “These MAVs are truly bird-inspired,” Gupta says. The next step for Gupta’s team is a “jumbo bird” that will be able to carry a payload of .70 ounces. Eventually this bird will fly along a course using an autopilot flight plan incorporating global positioning system software. The jumbo bird would be a little smaller than the size of a hawk, and will continue the incremental development of this promising technology.

| View videos of these MAVs flying at S.K. Gupta's web site |
| Read more about the technology online at |

Gupta’s research is funded in part by an Army Research Office MURI grant and the National Science Foundation. For more information, contact S.K. Gupta.

Related Articles:
Two Clark School teams take top spots in VFS micro air vehicle competition
Robo Raven on Display at a Major International Design Exhibit in France
New AFOSR NIFTI Center features eight Clark School faculty
Robo Raven appears on 60 Minutes
UAE students, Northrop Grumman engineers tour robotics laboratories
Gupta research group wins three awards at ASME IDETC/CIE
Robo Raven flies live on Fox 5 TV
Pioneering flight of ?Robo Raven? is major breakthrough for micro air vehicles
Robotics featured in Sept. 30 issue of The Diamondback
UMD, UMBC, ARL Announce Cooperative Agreement to Accelerate AI, Autonomy in Complex Environments

November 4, 2008

«Previous Story  



Current Headlines

Mechanical Engineering at Maryland is Hiring Open Rank Faculty Positions

Convocation to Shine Spotlight on Faculty, Staff Accomplishments

Balachandran Honored with ASME’s Den Hartog, Lyapunov Awards

Maryland Engineering ranked #12 public undergraduate program in the country

University of Maryland receives $8.75 million from DOE BENEFIT Grants

Harnessing Non-Reciprocity

Gabriel spending academic year in two visiting professorships

NSF Awards UMD $15M to Lead Mid-Atlantic Innovation Hub

Prof. Michael Ohadi Receives ASME 2021 Heat Transfer Memorial Award

Alumnus Mark Paulus Receives 2021 Dr. Delores M. Etter Top Scientists and Engineers of the Year Award

Back to top  
AML Home Clark School Home UMD Home ENME Home